10.03.22
Harris was selected as the mechanical contractor for this renovation of the Benioff Oakland Children’s Hospital, largely based on our long and successful history of hospital construction in the Bay Area, as well as our ability to execute the plumbing, mechanical piping and HVAC dry components under a single contract. This 28,000-square-foot 2-story remodel and upgrade consists of a new 23 bed PICU unit supported by an on suite Pharmacy, Pharmacy Hood, PBX/Sta lab and morgue.
Read More 10.03.22
Stanford Clinical Lab was comprised of four initial phases. The initial phase consisted of a rehabilitation work in preparation for the more robust rehabilitation in phases 2 and 4. These larger phases involved craning in a temporary air handling unit which would provide airflow into adjacent spaces while we stripped down and completely rebuilt the Clinical Lab space. The phase 2 workspace was also located directly below active operation rooms that would not allow for noise and vibration to occur ...
Read More 10.03.22
Harris Bay Area has teamed up with Harris Design Studio on a design-build project for San Francisco State University. The new science building project includes 126,000 GSF building which will provide students with classrooms, learning labs, research labs, etc. This target value design project will include integrated project delivery process, tools, and behaviors and is expected to achieve LEED Gold. Harris was given the schematic design documents and is currently working on the design documents and will be ...
Read More 10.03.22
Harris teamed up with Hensel Phelps for the plumbing a mechanical scope of the AME Polymers Lab (core and shell) and the AME Office building on the 2200 block of the laboratory. These two buildings were part of the first Applied Materials Engineering (AME) area plan put together by LLNL and NNSA to support stockpile stewardship.
Polymers lab consisted of a 13,000-square-foot, single story building with a complete mechanical and plumbing system with integrated ...
Read More 09.30.22
Harris was hired as the mechanical contractor to renovate an historic building located in downtown Vallejo for the La Clinica project. The exterior of the building was preserved while the interior was demolished. The facility serves as a dental clinic for the community.
Harris’ scope was plumbing only on this project which included the domestic waters, sanitary, storm drainage (including subsurface drainage within the building) and medical gases. At the dental chairs, our ...
Read More 09.30.22
The Bay Area Transit Hayward Station project was a service facility warehouse for BART and is located right next to the rail in Hayward, California. The project was a 135,000-square-foot building that included mostly warehouse space with some offices. The warehouse included under floor radiant piping to provide a comfort level for the client. Harris provided all of the plumbing, HVAC and ductwork on this project. The project was new construction which included plumbing underground all the ...
Read More 09.30.22
The Atherton Town Center project is comprised of a new city hall, library, police ancillary and remodel of the old existing town hall. Harris provided complete mechanical and plumbing systems, including controls and balancing on all structures. The main buildings are tied together through a 17K+ lb. mechanical heat pump system with a 118-ton heating/cooling capacity and interlocking BAS controls.
The new City Hall building includes 3 air handing units, 4 mechanical pumps, VRF ...
Read More 09.30.22
The Whidbey General Hospital Addition and Renovation project consisted of full mechanical scope for an addition and renovation to the existing facility. The addition consisted of 45 bed patient rooms, ICU rooms and labor and delivery rooms. The renovation included build out of pharmacy, lab and perioperative spaces. The HVAC systems included new penthouse air handlers feeding an VRF system.
The hospital’s domestic water supply source was an encased well and the water quality was poor. A ...
Read More 09.30.22
The Whatcom Community College Student House Phase 1 is an 89,000-square-foot, 221 bed dormitory facility. Additionally, it includes administration offices, public rest rooms, laundry, a mechanical equipment room, kitchen and community rooms. The structure is wood framing with electric cove heat in the dormitories, VRF in the offices and packaged DX units for the community rooms.
Harris contributed by developing an early schematic design budget that yielded excellent value for the owner. We were able design to this budget ...
Read More 09.30.22
Harris was awarded the design-assist contract for the new Sehome High School in Bellingham, Washington. This state-of-the-art facility fosters innovation and provides flexibility for future programmatic initiatives. New athletic fields, baseball, softball & football. The design focused on creating a healthy learning/teaching environment while being energy efficient and enhancing student safety.
Harris provided value engineering at the beginning of the project that saved the owner money while not sacrificing on quality. Some examples of value engineering ...
Read More 