10.12.22
For the River Towers HVAC Revitalization and Remediation project, Harris was the general contractor with multiple subcontractors direct with the owner. The project was design-build with mechanical, electrical, structural and architectural scope of work. The project consisted of condos with (2) towers, one 30 stories and the other 18 stories. There were also boilers, snowmelt, pool heating, plumbing heating and a 200-foot lattice flue structure up through the center of the building. This was an HVAC retrofit project that also ...
Read More 10.12.22
The Ridgeview Medical Center Surgery Remodel project was awarded to Harris as a design-build project. Harris provided the ductwork, design and engineering, HVAC, medical gas piping plumbing and test and balance for the project. We added new radiant panels above the patient beds along with a new headwall layout. The remodel was approximately 6,000 square feet and consisted of 23 beds.
This project was completed in ...
Read More 10.11.22
Once Harris completed construction of the new Park Nicollet clinic and ramp, it was time to get started on remodeling the existing clinic. The existing clinic is roughly 80,000 square feet and is to remain open during construction.
Knutson Construction worked with the owner and put together a multi-phased schedule. Each phase would cover a certain area of the clinic while the surrounding areas remained open to patients. Multiple phases on a building of ...
Read More 10.11.22
The Park Nicollet Specialty Center and Parking Ramp project is a new 86,000 square-foot clinic in Burnsville, Minnesota. The project consisted of building both a new three-story clinic and specialty care center, as well as a three-level parking garage. The clinic will include a same-day surgery center, urgent care center and medical and surgical specialty care.
Harris provided the ductwork, design and engineering, HVAC, mechanical piping, medical gas piping, plumbing and preconstruction services. A ...
Read More 10.11.22
The Minneapolis Bus Garage Project consists of a 350,000-square-foot bus garage to support a fleet of new buses for the City of Minneapolis. This includes a 3-bay fueling station, 2 bus washing bays, 24 maintenance bays, parking for 220 busses, underground employee parking and 3 floors of office space.
During preconstruction, Harris worked with the EOR to value engineer the mechanical system to substitute single package simultaneous water to water heat pumps to provide the building’s ...
Read More 10.10.22
Harris has been selected by M.A. Mortenson as the mechanical partner for the new Minnesota United FC Stadium in the Midway area of St. Paul. The $250 million, 346,000-square foot, 19,600-seat stadium will be home to Major League Soccer (MLS) in Minnesota.
The Harris team was engaged early to help with conceptional budgeting and design influences. Our team is currently working alongside the owner, architect and engineer in a design-assist role. An initial ...
Read More 10.10.22
Harris was awarded the mechanical contract for the expansion and renovation of the existing science lab building, The Nobel Hall houses the departments of biology, chemistry, geography, and geology. The 74,000 square-foot south expansion included new laboratories, teaching and study spaces, and connected Nobel Hall with Schaefer Fine Arts Center, creating a laboratory theatre. The project is certified LEED gold and has already helped contribute to over $186,000 in energy rebates for Gustavus.
Harris completed ...
Read More 10.10.22
Carleton College’s Science Complex Addition is a 118,000-square foot LEED Gold project which includes the demolition of their existing science building, Mudd Hall, and renovating the existing Hulings and Olin Halls classroom and laboratory spaces, including a 3,000-square foot vivarium. The project also includes new construction to connect the current buildings into one science facility. Harris was selected as the mechanical subcontractor by McGough Construction for the demolition of the previous building and the mechanical work ...
Read More 10.10.22
ABLMS is a mechanical infrastructure improvement project at the University of Minnesota – Twin Cities. The building has four levels of labs and faculty offices along with a modern meat processing facility. Harris was contracted to upgrade the current constant air handling systems (located in the lower level) with higher efficiency variable air volume (VAV) systems, consolidate lab exhaust, install energy recovery coils, and replace aging ductwork and piping systems. The project is phased ...
Read More 10.10.22
Harris was hired by JE Dunn Construction for a complete mechanical and plumbing upgrade for the 48,000-square foot emergency department remodel project at Abbott Northwestern Hospital. This project included a new heating water system and upgraded built-in-place custom air handling unit. The existing dual duct was changed out to a new VAV system with return valves and pressure monitoring and control. An upgraded control system and graphics package was also included for the remodeled emergency department and ...
Read More 